/
Release Notes 3.0.1

Release Notes 3.0.1

1. Overview

This is the FreeRTOS BSP (Board Support Package) and the development environment for the STM32H7 System-On-Module (SOM) and Starter Kit, release 3.0.1.

2. Hardware Platform

Refer to the following page for detailed information on the hardware items included in the Starter Kit: STM32H7 SOM Starter Kit.

The FreeRTOS BSP supports STM32H7 SOM Starter Kits with STM32H7-BSB Rev 1A and STM32H7-BSB Rev 2A baseboards.

3. Release Images

Release images for this software release can be downloaded from the Emcraft web site (requires registration and login):

The archive contains the following files:

  • keys/ - the certificate used for signing the FreeRTOS image;

  • scripts/stm32h7-som-prog.kermit - installation script;

  • freertos_stm32h750.img - FreeRTOS image;

  • u-boot.img - U-Boot image;

  • u-boot-spl.bin - U-Boot-SPL image;

  • stm32h7-splash-24bpp.bmp - splash image.

4. Setting Up Kit and Development Host

Refer to the following page for detailed information on how to build and use this software release: STM32H7 SOM Software.

5. Supported Features

The following list provides a summary of the features and capabilities of this release of the STM32H7 BSP:

  • U-Boot firmware:

    • U-Boot v 2019.04-rc3;

    • Serial console command interface with various setup, test and maintenance commands;

    • Environment variables allowing customisation of a unit;

    • Sophisticated RTOS auto-boot sequence;

    • Partitioning and management of external Flash;

    • Initial installation of RTOS images to external Flash.

  • FreeRTOS:

    • FreeRTOS v.10.3.1;

    • STM32CubeH7 v1.11.0 HAL;

    • Device drivers for key I/O interfaces of the STM32H7 SOM;

    • Driver for WiFi ESP Click module.

  • Development environment:

    • Linux-hosted cross-development environment.

6. Software Manifest