Building U-Boot

Owned by Natalia Sofronova
Last updated: Mar 04, 2024
1 min read

This application note explains how to build the U-Boot image for booting the Emcraft STM32MP1 System-On-Module from SD card. Step through the following procedure:

  1. Deploy the Yocto build as explained in Building Bootable Linux Images, but don't run bitbake yet.

  2. Run:

    $ bitbake u-boot-stm32mp ...

  3. Results will be in the deploy directory (the sub-directory will be stm32mp157d-som for the 800MHz STM32MP1-SOM variant):

    $ ls -l tmp-glibc/deploy/images/stm32mp15-som/fip/ ... -rw-r--r-- 1 psl psl 663332 Apr 16 20:55 fip-stm32mp157a-som-optee.bin $

  4. To install the binary to eMMC, copy it to the SOM via scp, the run:

    root@stm32mp1-som:~# dd if=fip-stm32mp157a-som-optee.bin of=/dev/mmcblk1p3 bs=1k conv=fdatasync