NAVQ Plus Linux BSP and Distribution, Release 1.0.8-273

1. Purpose

This is the Linux BSP (Board Support Package) and Linux software distribution and development environment for the NAVQ Plus Starter Kit, release 1.0.8-273.

2. Hardware Platform

Refer to the the following page for detailed information on the hardware items included in the Starter Kit: Documentation

3. Release Images

Release images for this software release can be downloaded from the following location:

https://vb-files.fra1.digitaloceanspaces.com/release/1.0.8-273-01112103-1755335887-ros2.wic.bz2

https://vb-files.fra1.digitaloceanspaces.com/release/1.0.8-273-01112103-1755335887-imx-boot-imx8mpnavq-sd.bin-flash_evk

4. Setting Up Kit and Development Host

Refer to the the following page for detailed information on how to:

• Set up the NAVQ Plus Starter Kit

• Set up development host

• Install release images to the NAVQ Plus target

• Boot up Linux on the NAVQ Plus target.

Documentation

5. Supported Features

The following list provides a summary of the features and capabilities of this release of the NAVQ Plus BSP:

• U-Boot firmware:

  • Runs on the Cortex-A53 cores;

  • U-Boot v2022.04;

  • Target initialization from power-on / reset;

  • Loads from eMMC (or other supported bootable device) and runs from DDR;

  • Serial console;

  • Ethernet driver for loading images to the target from network;

  • Device driver for eMMC / SD Card, including support for U-Boot self-upgrade capability;

  • Supports storing U-Boot environment and Linux images in eMMC / SD Card;

  • Auto-boot feature, allowing boot of OS images from eMMC or other storage with no operator intervention;

  • Persistent environment in eMMC or SD Card for customization of target operation;

  • Supports load of firmware images to the Cortex-M7 core;

  • Sophisticated command interface for maintenance and development of the target.

• Linux:

  • Runs on the Cortex-A53 cores;

  • Linux kernel v5.15.32;

  • Device drivers for key I/O interfaces of the i.MX 8M;

  • WiFi and BlueTooth connectivity;

  • Qt / QML 6.3.

• FreeRTOS:

  • Runs on the Cortex-M7 core;

  • Device drivers for select I/O interfaces of the i.MX 8M.

  • [NOTE: FreeRTOS is not available in this release].

• Development environment:

  • Linux-hosted cross-development environment;

  • Yocto v4.0 (kirkstone) distribution.

6. Software Manifest

7. New Functionality

The following is a summary of the changes in 1.0.8-273 since the last release 1.0.7-242:

8. Known Problems and Limitations

The following are known problems and limitations of this software release:

• NAVQP-9: GMac phy seems not to be working

• NAVQP-10: WLAN: FW CRC error during firmware download

• NAVQP-36: /usr/sbin/usb_gadgets.sh, line 11, "(" unexpected

• NAVQP-67: rpm tool doesn't show any packages on imx-image-desktop

• NAVQP-69: System runs out of memory without gdm auto-login and detached HDMI

• NAVQP-74: NAVQP USB Gadget services are missed in the imx-image-desktop image

• NAVQP-75: Typos in the usb-gadget-mtp@.service file

• NAVQP-83: VL4006 goes into boot loop if PicoSpot camera is connected

• NAVQP-86: lsusb is missed in imx-image-desktop-ros

• NAVQP-87: release_notes.py: error when reserved chars are encountered in changelog