Skip to end of banner Go to start of banner

Accessing the STM32MP target powered with Torizon OS in the Cloud

Skip to end of metadata

Created by Vladimir Skvortsov , last modified on Jan 23, 2025

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

1. Overview

This page briefly describes basic principles of accessing the STM32MP1/2 boards running Torizon OS from the Torizion Cloud.

1.1. Reference Documentation

Torizon-enabled STM32MP targets are accessible via the standard Torizon Cloud user interfaces. Refer to https://developer.toradex.com/torizon/torizon-platform/ for further information.

1.2. Pre-requisites

To interact with the Cloud the following pre-requirements must be met:

You have installed TorizonOS to the STM32MP board, this must be one of the STM32MP2 Evaluation board or Discovery kit or the STM32MP1 Discovery kit. Refer to Installing Torizon OS to STM32MP Target Boards Using the STM32 Programmer Tool
You have registered an account with the Torizon Cloud.

2. Accessing the STM32MP board from the Cloud

Perform the following steps:

Login to the Torizon Cloud. Activate the Devices tab and click + PROVISION DEVICE.
Then follow the instruction from the pop-up window, i.e. copy the provisioning command and then paste and run it in the serial console of the STM32MP board with TorizonOS booted up.
New device shall appear in the Cloud. As an example, the following picture illustrates a view of an STM32MP2-EVAL unit from the Torizon cloud:

No labels