1. Overview

This page briefly describes basic principles of accessing STM32MP boards running Torizon OS from the Torizion Cloud.

1.1. Reference Documentation

Torizon-enabled STM32MP targets are accessible via the standard Torizon Cloud user interfaces. Refer to https://developer.toradex.com/torizon/torizon-platform/ for further information.

1.2. Pre-requisites

To interact with the Cloud the following pre-requirements must be met:

• You have installed TorizonOS to the STM32MP board, this must be one of the STM32MP2 Evaluation board or Discovery kit or the STM32MP1 Discovery kit. Refer to https://voxelbotics.atlassian.net/wiki/spaces/DOC/pages/680787988.

• You have registered an account with the Torizon Cloud.

2. Accessing the STM32MP board from the Cloud

Perform the following steps:

1. Login to the Torizon Cloud. Activate the Devices tab and click + PROVISION DEVICE:

   Open

   

2. Follow the instruction from the pop-up window, i.e. copy the provisioning command and then paste and run it in the serial console of the STM32MP board with TorizonOS booted up:

   Open

   

3. A new device should appear in the Cloud. As an example, the following picture illustrates a view of an STM32MP2-EVAL unit from the Torizon cloud:

   Open