Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Current »

Renesas RZ/V2H Linux BSP and Distribution, Release 1.0.0-12

1. Purpose

This is the Linux BSP (Board Support Package) and Linux software distribution and development environment for the Renesas RZ/V2H Evaluation Kit, release 1.0.0-12.

2. Hardware Platform

Renesas RZ/V2H Evaluation Kit.

3. Release Images

Release images for this software release can be downloaded from the following location:

https://vb-files.fra1.digitaloceanspaces.com/release/1.0.0-12-10301638-rzv2h.zip

4. Setting Up Kit and Development Host

Connect to the Evaluation Kit board:

  • Serial console into CN10.

  • Power supply into CN40.

  • Ethernet cable connected to the LAN, into CN5.

Requirements for the development host:

  • Ubuntu 20, 64 bit version.

  • 100 GB of free space.

  • Terminal software (picocom, minicom or similar) installed.

Please refer to the Renesas “Getting Started” document EPSD-IMB-23-0095-01_RZV2H_GettingStarted_ForBeta.pdf for information on building the bootable images and installing the images to the board.

5. Supported Features

The following list provides a summary of the features and capabilities of this release of the RZ/V2H BSP:

  • U-Boot firmware:

    • Runs on the Cortex-A55 core;

    • U-Boot v2021.10;

    • Target initialization from power-on / reset;

    • Loads from QSPI Flash and runs from DDR;

    • Serial console;

    • Ethernet driver for loading images to the target from network;

    • Device driver for eMMC / SD Card;

    • Auto-boot feature, allowing boot of OS images from eMMC or other storage with no operator intervention;

    • Persistent environment for customization of target operation;

    • Sophisticated command interface for maintenance and development of the target.

  • Linux:

    • Runs on the Cortex-A55 cores;

    • Linux kernel v5.10.145;

    • Device drivers for key I/O interfaces;

  • FreeRTOS:

    • Runs on the Cortex-CM33 or CR8 core;

    • Device drivers for select I/O interfaces.

    • [NOTE: FreeRTOS is not available in this release].

  • Development environment:

    • Linux-hosted cross-development environment;

    • Yocto v3.1 (dunfell) distribution.

6. Software Manifest

Repo

Link

Hash

Tag

meta-econsys

https://github.com/EmcraftSystems/meta-econsys

1c0087c3

tags/1.0.0-12

meta-renesas

https://github.com/EmcraftSystems/meta-renesas

cb4f367f

tags/1.0.0-12

meta-rz-multi-os

https://github.com/EmcraftSystems/meta-rz-multi-os

1ff8c864

tags/1.0.0-12

meta-rz-graphics

https://github.com/EmcraftSystems/meta-rz-graphics

d6c2c3d2

tags/1.0.0-12

meta-rz-drpai

https://github.com/EmcraftSystems/meta-rz-drpai

771ffd42

tags/1.0.0-12

meta-rzv2-ros

https://github.com/EmcraftSystems/meta-rzv2-ros

33ef5215

tags/1.0.0-12

7. New Functionality

The following is a summary of the changes in 1.0.0-12 since the last release yocto-renesas-beta2-20231025:

8. Release QA Results

The tests described in the following QA Test Plan have been executed for this release:

Test

Result

Comment

U-Boot installation

SKIPPED

SD card installation and booting

PASSED

eMMC installation and booting

PASSED

Ethernet

PASSED

9. Known Problems and Limitations

The following are known problems and limitations of this software release:

  • RNS-8: Booting from eMMC is not supported.

  • RNS-9: Booting from SD Card is not supported.

  • RNS-10: "ASoC: error at soc_component_read_no_lock" messages flood on the serial console

  • No labels