1. Overview

This page briefly describes basic principles of accessing i.MX 8MPlus boards running Torizon OS from the Torizion Cloud.

1.1. Reference Documentation

Torizon-enabled i.MX 8MPlus targets are accessible via the standard Torizon Cloud user interfaces. Refer to Torizon Cloud Documentation Overview | Toradex Developer Center for further information.

1.2. Pre-requisites

To interact with the Cloud the following pre-requirements must be met:

• You have installed TorizonOS to the i.MX 8MPlus NAVQ+ board Refer to Installing Torizon OS to i.MX 8MPlus NAVQ+ Target.

• You have registered an account with the Torizon Cloud.

2. Accessing the i.MX 8MPlus NAVQ+ board from the Cloud

Perform the following steps:

1. Login to the Torizon Cloud. Activate the Devices tab and click + PROVISION DEVICE:

   Open

   

2. Follow the instruction from the pop-up window, i.e. copy the provisioning command and then paste and run it in the serial console of the i.MX 8MPlus NAVQP+ board with TorizonOS booted up:

   Open

   

3. A new device should appear in the Cloud. As an example, the following picture illustrates a view of an i.MX 8MPlus NAVQ+ unit from the Torizon cloud:

   Open