Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updating numbered headings
Table of Contents
stylenone

1. Overview

This is the Linux BSP (Board Support Package) and the development environment for the STM32H7 System-On-Module (SOM) and Starter Kit, release 2.6.1.

The BSP provides a software development environment for evaluation and development of Linux (uClinux) on the Cortex-M7 processor core of the STM32H7 microcontroller using the Emcraft STM32H7 SOM Starter Kit as a hardware platform.

2. Supported Features

The following list provides a summary of the features and capabilities of this release of the STM32H7 BSP:

  • Linux:

    • Kernel v.6.1.28;

    • Serial Linux console;

    • Ethernet device driver and Linux TCP/IP networking (ping, NFS, Telnet, FTP, NTPD, etc);

    • Clock driver;

    • pinctrl driver;

    • busybox v1.35.0;

    • POSIX pthreads;

    • Hardened exception handling; an exception triggered by a process affects only the offending process.

  • U-Boot firmware:

    • U-Boot v 2019.04-rc3;

    • Serial console command interface with various setup, test and maintenance commands;

    • Environment variables allowing customisation of a unit;

    • Sophisticated OS auto-boot sequence;

    • Partitioning and management of external Flash;

    • Initial installation of Linux image to external Flash.

  • Development environment:

    • Linux-hosted cross-development environment;

    • 10.3-2021.10 Arm Embedded Toolchain is used for development of U-Boot, Linux;

    • 11.3 GNU toolchain is used for development of user-space applications;

    • ELF / dynamic linking supported;

    • Debugging of user-space applications with cross-GDB;

    • Hardware FPU enabled in the toolchain and kernel;

    • mkimage tool used by the Linux kernel build process to create a bootable Linux image.

3. Software Manifest

Repo

Link

Hash

Branch

Linux STM32H7

https://github.com/EmcraftSystems/linux-stm.git

6440efa8742c

linux-cm-stm32h7-2.6.1

U-Boot STM32H7

https://gitlab.com/emcraft/STM32H7/u-boot-upstream.git

21ffdfe253

linux-cm-stm32h7-2.6.1

4. New and Changed Features

The following is a summary of the changes in release 2.6.1, as compared to release 2.6.0:

  1. Fix bug: Controlling LEDs from user space doesn't work in uClinux 2.6.0 for STM32H7 SOM.
    ID: STM32H7-22.

  2. Fix bug: The "next" command does not work in gdb 11.2.
    ID: RM 7052.

5. Known Problems and Limitations

This section lists known problems and limitations of this release:

...