| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
1. Overview
This application note describes how to connect the PMD flexx2 3D camera to the Renesas EVK board, and use the Royaleviewer camera UI running on the Renesas EVK for streaming data from the camera.
...
https://3d.pmdtec.com/en/3d-cameras/flexx2/
2. Connecting the Camera
To connect the PMD flexx2 camera to the Renesas EVK kit, use a USB 3.1 Gen 1 compatible USB cable and connect the camera to the USB1 port of the carrier board.
...
The following picture illustrates connection of the camera and display to the kit:
...
3. Running Royaleviewer
On the Renesas EVK display, navigate to the Gnome application menu, and find the Royaleviewer icon. Run the Royaleviewer application, then press the “Start” button in the bottom right corner. The PMD flexx2 camera will initialize and start streaming the 3D visualization of the surrounding area.
...