Page Comparison

...

Plug-in the USB WiFi device to the USB OTG port (USB1 J9 interface connector on the NXP i.MX RT1050 EVK board or USB1 J47 interface connector on the NXP i.MX RT1060 EVK board). The system will print the following to the console:

...

• Update the content of projects/rootfs/etc/wpa_supplicant.conf;

• Rebuild the project as described in Building Linux ;

• Install the new rootfs.uImage file as described in Building and Installing Linux uImage on the NXP i.MX RT10XX EVK Board .