Page Comparison

...

1. Click the Debug button at the top panel:
   

   

2. Apply the launch configuration if prompted:

   Image Added

3. Select Remember my decision and switch to the Debug Perspective if prompted: d

   fff

   

4. Wait for the STM32CubeIDE to write the firmware image to the target via ST-Link and stop at the main() function:
   

   Image RemovedImage Added

5. Proceed to execute you program with steps, put breakpoints, and examine variables.

...

This section lists known problems and limitations of this project configuration.

...

.

1. LCD is not supported.

2. U-Boot environment and reliable upgrade are not available because the U-Boot boot loader has been removed.