Versions Compared

Old Version 3

changes.mady.by.user Dmitry Bazhenov

Saved on

compared with

New Version Current

changes.mady.by.user Dmitry Bazhenov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Install release image to SD card, as per Flashing SD Card with Linux Image from Linux Host https://voxelbotics.atlassian.net/wiki/spaces/DOC/pages/561709076/STM32MP2+EV1+Booting+Linux+from+SD+Card?atl_f=content-tree .

  2. Boot to shell prompt using SD card, measure boot time (~2 min for the first boot)

  3. Reboot the board and boot to shell prompt using SD card, measure boot time (~25 seconds for the second time).

3.2. Empty eMMC Boot Time Test

...

  1. Install images to eMMC as per Installing Linux to the EMMC Using USB Serial Downloader.Repeat Ethernet, WiFi and HDMI tests while booting from eMMC https://voxelbotics.atlassian.net/wiki/spaces/DOC/pages/561709096/STM32MP2+EV1+Booting+Linux+from+eMMC?atl_f=content-tree .

  2. Boot to shell prompt using eMMC, measure boot time (24 seconds for the first boot)

  3. Reboot the board and boot to shell prompt using eMMC, measure boot time (~15 seconds for the second time).

3.4. Ethernet Test

  1. Check that internet access is configured automatically.

  2. Run ping google.com.