...

1. Create a separate directory and clone the FreeRTOS project for the STM32H7-SOM from the common STM32CubeH7 repository:

   Code Block
   $ mkdir stm32h7-som $ cd stm32h7-som $ git clone https://gitlab.com/emcraft/STM32H7/STM32CubeH7.git -b master-1.11.0-cubeideemcraft-projects

2. Start STM32CubeIDE and select a workspace directory. The workspace directory is an arbitrary directory, different from the directory where your source file is located.

3. Click File->Open Projects from File System:

   Image RemovedImage Added

4. Select <STM32CubeH7 path>/Projects/STM32H7_SOM/Applications/FreeRTOS/freertos_stm32h750/SW4STM32/STM32H750-SOMfreertos_stm32h7_som path and click Finish.

5. Building the Project

1. In Project Explorer double click to the freertos_stm32h7_stm32h750som.ioc file to activate the Device Configuration Tool:

   Image RemovedImage Added

2. Click Project->Generate Code or press Alt-K to generate C-files from the .ioc file.

3. Click Project->Build Project or press Ctrl-B to start building.

4. Select the Console tab and check the output:

   Image RemovedImage Added

5. If needed, find the executable binaries in the Debug subfolder of the FreeRTOS project directory.

...

1. Click the Debug button at the top panel:
   

   Image Removed

   
   

   Image Added

2. Apply the launch configuration if prompted:

   Image Added

3. Select Remember my decision and switch to the Debug Perspective if prompted:

   

4. Wait for the STM32CubeIDE to write the firmware image to the target via ST-Link and stop at the main() function:
   

   Image RemovedImage Added

5. Proceed to execute you program with steps, put breakpoints, and examine variables.

...

This section lists known problems and limitations of this project configuration.

...

.

1. LCD is not supported.

2. U-Boot environment and reliable upgrade are not available because the U-Boot boot loader has been removed.