Content Comparison

...

Go to ncs/nrf installation subdirectory
git remote set-url origin https://github.com/EmcraftSystems/sdk-nrf.git
git fetch origin
git checkout emcraft-v2.8.0-branch
west update

2.1. Installing the nRF Connect SDK

...

Note that Emcraft maintains forks of the nRF Connect SDK and Zephyr OS on GitHub, where additional improvements are made for the nRF91xx and nRF5340 devices:

https://githubvoxelbotics.atlassian.comnet/EmcraftSystems/sdk-nrfhttps://github.com/EmcraftSystems/sdk-zephyr wiki/spaces/SOMnRF9151/pages/804093953/Understanding+Zephyr+BSP+for+SOM-NRF9151#2.-Customized-nRF-Connect-SDK

In order to use the Emcraft SDK and Zephyr forks, adjust the SDK initialization command from the SDK installation document as follows:

...

The SOM-NRF9151 Zephyr application is maintained in the separate GitHub repository:

https://github.com/EmcraftSystems/som-nrf9151-app

Clone it in the same directory where west was initialized:

...

During the nightly and release build, Buildbot adjusts the application version and build type (either debug or release) in the prj.conf file:

...

3.2. Understanding Automated Build

Emcraft maintains the Buildbot based automated build of the SOM-NRF9151 Applicationapplication, which is triggered by every change in the application repository. The subscribers receive an email from the Buildbot containing the references to the pre-built application binaries that can be downloaded from a cloud, for example:

Note that both debug (CONFIG_APP_VERSION_DEBUG=y) and release (CONFIG_APP_VERSION_DEBUG=n) images are generated for every application.

...

The SOM-NRF9151 board uses an out-of-tree board configuration, since it is not supported in Zephyr:

https://githubvoxelbotics.atlassian.comnet/EmcraftSystems/som-nrf9151-app/tree/main/boards/emcraft/nrf9151somwiki/spaces/SOMnRF9151/pages/804093953/Understanding+Zephyr+BSP+for+SOM-NRF9151#3.1.-SOM-NRF9151-Board-Configuration

Build the application for the nRF9151 on the SOM-NRF9151 using the following command:

...