...
Insert SD Card to the board.
Follow the instructions in the https://voxelbotics.atlassian.net/wiki/spaces/DOC/pages/546275360/Setting+up+the+STM32MP257F-EV1+Evaluation+Board#Installing-the-STM32CubeProgrammer-tool to install the STM32CubeProgrammer Tool to your host.
Add
STM32_Programmer_CLIto yourPATH:Code Block $ export PATH=$PATH:/bin: $ STM32_Programmer_CLI [psl@sergmir programmer]$ STM32_Programmer_CLI ------------------------------------------------------------------- STM32CubeProgrammer v2.17.0 ------------------------------------------------------------------- Usage : STM32_Programmer_CLI.exe [command_1] [Arguments_1][[command_2][Arguments_2]...] ...
Power off the board and select the USB Serial Downloader mode (see in https://voxelbotics.atlassian.net/wiki/spaces/DOC/pages/561709057/Selecting+STM32MP2+EV1+Boot+Device?atl_f=content-tree ).
Attach USB-C (for STM32MP2 EV) cable to connector CN15 and to the Linux host.
Power on the board, attaching another USB-C cable to connector CN15.
Check that the programming USB port appeared on the host (note the "Device Index" in the output):
Code Block ------------------------------------------------------------------- STM32CubeProgrammer v2.17.0 ------------------------------------------------------------------- ===== DFU Interface ===== Total number of available STM32 device in DFU mode: 1 Device Index : USB1 USB Bus Number : 002 USB Address Number : 007 Product ID : DFU in HS Mode @Device ID /0x505, @Revision ID /0x2000 Serial number : 002A00194136500B00363653 Firmware version : 0x0110 Device ID : 0x0505Download the Emcraft release images from Emcraft site and unpack them into the arbitrary directory. (If you are installing the images built by Yocto, navigate to the
builddir/tmp-glibc/deploy/images/stm32mp25-evaldirectory):Code Block $ tar xfj stm32mp2-4.3.0.tgz $ cd stm32mp2-4.3.0 $ ls -l total 1287524 drwxr-xr-x 2 psl psl 4096 Oct 7 02:43 arm-trusted-firmware -rw-r--r-- 1 psl psl 1201 Apr 5 2011 build-emcraft-rootfs-openstlinux-weston-stm32mp25-eval -rw-r--r-- 1 psl psl 1066606592 Oct 7 02:39 emcraft-rootfs-openstlinux-weston-stm32mp25-eval.ext4 -rw-r--r-- 1 psl psl 116724 Oct 7 02:38 emcraft-rootfs-openstlinux-weston-stm32mp25-eval.manifest drwxrwxr-x 2 psl psl 4096 Oct 7 02:28 fip drwxr-xr-x 4 psl psl 4096 Oct 7 02:42 flashlayout_emcraft-rootfs drwxr-xr-x 2 psl psl 4096 Sep 23 03:11 scripts -rw-r--r-- 1 psl psl 67108864 Oct 4 01:41 st-image-bootfs-openstlinux-weston-stm32mp25-eval.ext4 -rw-r--r-- 1 psl psl 179 Oct 4 01:41 st-image-bootfs-openstlinux-weston-stm32mp25-eval.manifest -rw-r--r-- 1 psl psl 134217728 Oct 4 01:33 st-image-userfs-openstlinux-weston-stm32mp25-eval.ext4 -rw-r--r-- 1 psl psl 5794 Oct 4 01:33 st-image-userfs-openstlinux-weston-stm32mp25-eval.manifest -rw-r--r-- 1 psl psl 50331648 Oct 4 01:32 st-image-vendorfs-openstlinux-weston-stm32mp25-eval.ext4 -rw-r--r-- 1 psl psl 842 Oct 4 01:32 st-image-vendorfs-openstlinux-weston-stm32mp25-eval.manifest
Use the SD card Flash Layout file for programming the images to SD card:
Code Block [psl@sergmir 3.0.0]$ STM32_Programmer_CLI -c port=usb1 -w flashlayout_emcraft-rootfs/optee/FlashLayout_sdcard_stm32mp257f-ev1-optee.tsv ------------------------------------------------------------------- STM32CubeProgrammer v2.17.0 ------------------------------------------------------------------- USB speed : High Speed (480MBit/s) Manuf. ID : STMicroelectronics Product ID : DFU in HS Mode @Device ID /0x505, @Revision ID /0x2000 SN : 002A00194136500B00363653 DFU protocol: 1.1 Board : -- Device ID : 0x0505 Device name : STM32MP25xx Device type : MPU Revision ID : -- Device CPU : Cortex-A7 Start Embedded Flashing service Memory Programming ... Opening and parsing file: tf-a-stm32mp257f-ev1-usb.stm32 File : tf-a-stm32mp257f-ev1-usb.stm32 Size : 198.86 KB Partition ID : 0x01 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:02.225 RUNNING Program ... PartID: :0x01 Reconnecting the device ... USB speed : High Speed (480MBit/s) Manuf. ID : STMicroelectronics Product ID : DFU @Device ID /0x505, @Revision ID /0x0011, @Name /STM32MP257FAI Rev.Y, SN : 002A00194136500B00363653 DFU protocol: 1.1 Board : -- Device ID : 0x0505 Device name : STM32MP257FAI Rev.Y Device type : MPU Device CPU : Cortex-A7 Start operation done successfully at partition 0x01 Memory Programming ... Opening and parsing file: fip-stm32mp257f-ev1-ddr-optee-sdcard.bin File : fip-stm32mp257f-ev1-ddr-optee-sdcard.bin Size : 29.38 KB Partition ID : 0x02 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:00.026 RUNNING Program ... PartID: :0x02 Reconnecting the device ... USB speed : High Speed (480MBit/s) Manuf. ID : STMicroelectronics Product ID : DFU @Device ID /0x505, @Revision ID /0x0011, @Name /STM32MP257FAI Rev.Y, SN : 002A00194136500B00363653 DFU protocol: 1.1 Board : -- Device ID : 0x0505 Device name : STM32MP257FAI Rev.Y Device type : MPU Device CPU : Cortex-A7 Start operation done successfully at partition 0x02 Memory Programming ... Opening and parsing file: fip-stm32mp257f-ev1-optee-sdcard.bin File : fip-stm32mp257f-ev1-optee-sdcard.bin Size : 2.65 MB Partition ID : 0x03 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:02.363 RUNNING Program ... PartID: :0x03 Reconnecting the device ... USB speed : High Speed (480MBit/s) Manuf. ID : STMicroelectronics Product ID : USB download gadget@Device ID /0x505, @Revision ID /0x0011, @Name /STM32MP257FAI Rev.Y, SN : 002A00194136500B00363653 DFU protocol: 1.1 Board : -- Device ID : 0x0505 Device name : STM32MP257FAI Rev.Y Device type : MPU Device CPU : Cortex-A7 Start operation done successfully at partition 0x03 Flashlayout Programming ... [==================================================] 100% Running Flashlayout Partition ... Reconnecting the device ... USB speed : High Speed (480MBit/s) Manuf. ID : STMicroelectronics Product ID : USB download gadget@Device ID /0x505, @Revision ID /0x0011, @Name /STM32MP257FAI Rev.Y, SN : 002A00194136500B00363653 DFU protocol: 1.1 Board : -- Device ID : 0x0505 Device name : STM32MP257FAI Rev.Y Device type : MPU Device CPU : Cortex-A7 Flashlayout partition started successfully Memory Programming ... Opening and parsing file: tf-a-stm32mp257f-ev1-optee-sdcard.stm32 File : tf-a-stm32mp257f-ev1-optee-sdcard.stm32 Size : 202.91 KB Partition ID : 0x04 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:00.059 RUNNING Program ... PartID: :0x04 Start operation done successfully at partition 0x04 Memory Programming ... Opening and parsing file: tf-a-stm32mp257f-ev1-optee-sdcard.stm32 File : tf-a-stm32mp257f-ev1-optee-sdcard.stm32 Size : 202.91 KB Partition ID : 0x05 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:00.058 RUNNING Program ... PartID: :0x05 Start operation done successfully at partition 0x05 Memory Programming ... Opening and parsing file: metadata.bin File : metadata.bin Size : 120.00 B Partition ID : 0x06 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:00.006 RUNNING Program ... PartID: :0x06 Start operation done successfully at partition 0x06 Memory Programming ... Opening and parsing file: metadata.bin File : metadata.bin Size : 120.00 B Partition ID : 0x07 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:00.006 RUNNING Program ... PartID: :0x07 Start operation done successfully at partition 0x07 Memory Programming ... Opening and parsing file: fip-stm32mp257f-ev1-optee-sdcard.bin File : fip-stm32mp257f-ev1-optee-sdcard.bin Size : 2.65 MB Partition ID : 0x08 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:00.748 RUNNING Program ... PartID: :0x08 Start operation done successfully at partition 0x08 Memory Programming ... Opening and parsing file: st-image-bootfs-openstlinux-weston-stm32mp25-eval.ext4 File : st-image-bootfs-openstlinux-weston-stm32mp25-eval.ext4 Size : 64.00 MB Partition ID : 0x10 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:22.067 RUNNING Program ... PartID: :0x10 Start operation done successfully at partition 0x10 Memory Programming ... Opening and parsing file: st-image-vendorfs-openstlinux-weston-stm32mp25-eval.ext4 File : st-image-vendorfs-openstlinux-weston-stm32mp25-eval.ext4 Size : 48.00 MB Partition ID : 0x11 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:16.231 RUNNING Program ... PartID: :0x11 Start operation done successfully at partition 0x11 Memory Programming ... Opening and parsing file: emcraft-rootfs-openstlinux-weston-stm32mp25-eval.ext4 File : emcraft-rootfs-openstlinux-weston-stm32mp25-eval.ext4 Size : 1017.20 MB Partition ID : 0x12 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:05:56.591 RUNNING Program ... PartID: :0x12 Start operation done successfully at partition 0x12 Memory Programming ... Opening and parsing file: st-image-userfs-openstlinux-weston-stm32mp25-eval.ext4 File : st-image-userfs-openstlinux-weston-stm32mp25-eval.ext4 Size : 128.00 MB Partition ID : 0x13 Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:43.629 RUNNING Program ... PartID: :0x13 Start operation done successfully at partition 0x13 Flashing service completed successfully $Disconnect the cables CN21 (for STM32MP2 EV1).
Set the boot mode for booting from SD Card. (Refer to https://voxelbotics.atlassian.net/wiki/spaces/DOC/pages/561709057/Selecting+STM32MP2+EV1+Boot+Device?atl_f=content-tree .)
Connect USB-C cable to connector CN21 for STM32MP2 EV1, this powers the board on.
Connect to the serial console:
Code Block INFO: PSCI Power Domain Map: INFO: Domain Node : Level 4, parent_node 4294967295, State ON (0x0) INFO: Domain Node : Level 3, parent_node 0, State ON (0x0) INFO: Domain Node : Level 2, parent_node 1, State ON (0x0) INFO: Domain Node : Level 1, parent_node 2, State ON (0x0) INFO: CPU Node : MPID 0x0, parent_node 3, State ON (0x0) INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 3, State OFF (0x3) NOTICE: CPU: STM32MP257FAI Rev.Y NOTICE: Model: STMicroelectronics STM32MP257F-EV1 Evaluation Board NOTICE: Board: MB1936 Var1.0 Rev.D-01 INFO: Reset reason (0x2074): INFO: System reset (SYSRST) by A35 INFO: PMIC2 version = 0x11 INFO: PMIC2 product ID = 0x20 INFO: FCONF: Reading TB_FW firmware configuration file from: 0xe011000 INFO: FCONF: Reading firmware configuration information for: stm32mp_io INFO: FCONF: Reading firmware configuration information for: stm32mp_fuse INFO: Using SDMMC INFO: Instance 1 ...Alternatively, a bootable SD Card could be prepared on the host. In the images directory, run the command below:
Code Block $ ./scripts/create_sdcard_from_flashlayout.sh flashlayout_emcraft-rootfs/optee/FlashLayout_sdcard_stm32mp257f-ev1-optee.tsv Create Raw empty image: flashlayout_emcraft-rootfs/optee/../../FlashLayout_sdcard_stm32mp257f-ev1-optee.raw of 5120MB Create partition table: [CREATED] part 01: fsbla1 [partition size 256.0 KiB] [CREATED] part 02: fsbla2 [partition size 256.0 KiB] [CREATED] part 03: metadata1 [partition size 256.0 KiB] [CREATED] part 04: metadata2 [partition size 256.0 KiB] [CREATED] part 05: fip-a [partition size 4.0 MiB] [CREATED] part 06: fip-b [partition size 4.0 MiB] [CREATED] part 07: u-boot-env [partition size 512.0 KiB] [CREATED] part 08: bootfs [partition size 64.0 MiB] [CREATED] part 09: vendorfs [partition size 183.0 MiB] [CREATED] part 10: rootfs [partition size 4.0 GiB] [CREATED] part 11: userfs [partition size 767.5 MiB] Partition table from flashlayout_emcraft-rootfs/optee/../../FlashLayout_sdcard_stm32mp257f-ev1-optee.raw Disk flashlayout_emcraft-rootfs/optee/../../FlashLayout_sdcard_stm32mp257f-ev1-optee.raw: 10485760 sectors, 5.0 GiB Sector size (logical): 512 bytes Disk identifier (GUID): A5D05764-F429-409B-A9CD-8662ECCF952E Partition table holds up to 128 entries Main partition table begins at sector 2 and ends at sector 33 First usable sector is 34, last usable sector is 10485726 Partitions will be aligned on 2-sector boundaries Total free space is 0 sectors (0 bytes) Number Start (sector) End (sector) Size Code Name 1 34 545 256.0 KiB 8301 fsbla1 2 546 1057 256.0 KiB 8301 fsbla2 3 1058 1569 256.0 KiB FFFF metadata1 4 1570 2081 256.0 KiB FFFF metadata2 5 2082 10273 4.0 MiB FFFF fip-a 6 10274 18465 4.0 MiB FFFF fip-b 7 18466 19489 512.0 KiB FFFF u-boot-env 8 19490 150561 64.0 MiB 8300 bootfs 9 150562 525345 183.0 MiB 8300 vendorfs 10 525346 8913953 4.0 GiB 8300 rootfs 11 8913954 10485726 767.5 MiB 8300 userfs Partition GUID code: 19D5DF83-11B0-457B-BE2C-7559C13142A5 (Unknown) Partition unique GUID: 4FD84C93-54EF-463F-A7EF-AE25FF887087 First sector: 2082 (at 1.0 MiB) Last sector: 10273 (at 5.0 MiB) Partition size: 8192 sectors (4.0 MiB) Attribute flags: 0000000000000000 Partition name: 'fip-a' Partition GUID code: 19D5DF83-11B0-457B-BE2C-7559C13142A5 (Unknown) Partition unique GUID: 09C54952-D5BF-45AF-ACEE-335303766FB3 First sector: 10274 (at 5.0 MiB) Last sector: 18465 (at 9.0 MiB) Partition size: 8192 sectors (4.0 MiB) Attribute flags: 0000000000000000 Partition name: 'fip-b' Partition GUID code: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 (Linux filesystem) Partition unique GUID: E91C4E10-16E6-4C0E-BD0E-77BECF4A3582 First sector: 525346 (at 256.5 MiB) Last sector: 8913953 (at 4.3 GiB) Partition size: 8388608 sectors (4.0 GiB) Attribute flags: 0000000000000000 Partition name: 'rootfs' Populate raw image with image content: [ FILLED ] part 01: fsbla1, image: arm-trusted-firmware/tf-a-stm32mp257f-ev1-optee-sdcard.stm32 [ FILLED ] part 02: fsbla2, image: arm-trusted-firmware/tf-a-stm32mp257f-ev1-optee-sdcard.stm32 [ FILLED ] part 03: metadata1, image: arm-trusted-firmware/metadata.bin [ FILLED ] part 04: metadata2, image: arm-trusted-firmware/metadata.bin [ FILLED ] part 05: fip-a, image: fip/fip-stm32mp257f-ev1-optee-sdcard.bin [ FILLED ] part 08: bootfs, image: st-image-bootfs-openstlinux-weston-stm32mp25-eval.ext4 [ FILLED ] part 09: vendorfs, image: st-image-vendorfs-openstlinux-weston-stm32mp25-eval.ext4 [ FILLED ] part 10: rootfs, image: emcraft-rootfs-openstlinux-weston-stm32mp25-eval.ext4 [ FILLED ] part 11: userfs, image: st-image-userfs-openstlinux-weston-stm32mp25-eval.ext4 ########################################################################### ########################################################################### RAW IMAGE generated: flashlayout_emcraft-rootfs/optee/../../FlashLayout_sdcard_stm32mp257f-ev1-optee.raw WARNING: before to use the command dd, please umount all the partitions associated to SDCARD. sudo umount `lsblk --list | grep mmcblk0 | grep part | gawk '{ print $7 }' | tr '\n' ' '` To put this raw image on sdcard: sudo dd if=flashlayout_emcraft-rootfs/optee/../../FlashLayout_sdcard_stm32mp257f-ev1-optee.raw of=/dev/mmcblk0 bs=8M conv=fdatasync status=progress (mmcblk0 can be replaced by: sdX if it's a device dedicated to receive the raw image (where X can be a, b, c, d, e) To mount bootfs partition: udisksctl mount -b /dev/disk/by-partlabel/bootfs After the dd command you can verify if copy are correctly done and partitions take into account sgdisk /dev/mmcblk0 -p sgdisk /dev/mmcblk0 -v if '-v' command indicate a problem, please execute the following command: sgdisk /dev/mmcblk0 -e ########################################################################### ########################################################################### [psl@sergmir 3.0.0]$Insert SD Card to the host and the run command above to program:
Code Block $ sudo dd if=flashlayout_emcraft-rootfs/optee/../../FlashLayout_sdcard_stm32mp257d-ev1-optee.raw of=/dev/ bs=8M conv=fdatasync status=progress ...
...