...

1. From the Linux shell, type the ebike_gui_demo command to run the ebike demo:

   Code Block
   / # ebike_gui_demo

2. Click to the padlock icon in the bottom right corner of the screen to switch to the Unlock Your Bike group.

   

3. Click 4 any digits and then v. Make sure the correct PIN-code in printed out to the Linux shell terminal:

   Code Block
   / # ebike_gui_demo entered pin: 4 7 1 2

4. Click to the bike icon to switch back to the Driving Information group.

5. Press and hold the SW8 button which resides on the opposite side of the i.MXR10XX-EVKB board to LCD. Make sure that the Speed, Trip, Odometer and other values are increasing on the corresponding widgets on the LCD. If release the SW8 button the Speed reading is decreasing:

   

4. Building LVGL

4.1.

...

Secure Download Area

Emcraft support the LVGL port to the i.MX RT as a paid add-on.

Once you have purchased the add-on from Emcraft, you can obtain the LVGL patch from the following location:

• for For the imxrt1050 BSP (release 3.0.4):

...

Login: CONTACT EMCRAFT

Password: CONTACT EMCRAFT

• for For the imxrt1050 BSP (release 3.1.0):

...

Login: CONTACT EMCRAFT

Password: CONTACT EMCRAFT

• for For the imxrt1060 BSP (release 3.1.0):

...

Login: CONTACT EMCRAFT

Password: CONTACT EMCRAFT

• for For the imxrt1170 BSP:
  https://www.emcraft.com/imxrtaddon/imxrt1170/lvgl
  The page is protected as follows:

...