Versions Compared

Old Version 10

changes.mady.by.user Vladimir Khusainov

Saved on

compared with

New Version 11

changes.mady.by.user Alexander Dyachenko

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Step through the following procedure in order to set up the emulated platform hardware:

  • Connect a USB Type-C cable to the J6 connector on the nRF9161 DK to the Linux host using a USB Type-C cable to get access to the on-board programmer and serial console. Specifically, connect a USB Type-C

  • Connect a Micro-USB cable to the J6 connector.Connect J2 connector on the nRF5340 DK, and to the Linux host to get access to the on-board programmer and the VCOM based serial console. Specifically, connect consoles.

  • Connect a Micro-USB cable to the J2 connectorJ3 connector on the nRF5340 DK, and to the Linux host to get access to the USB based serial consoles.

3. Connecting USB Devices to the VMware Virtual Machine

...