...

This note describes how to set up the emulated hardware platform.

...

2. Setting Up Hardware

Connect the nRF9161 DK to the Linux host using a USB Type-C cable to get access to the on-board programmer and serial console. Specifically, connect a USB Type-C cable to the J6 connector.

Connect nRF5340 DK to the Linux host to get access to the on-board programmer and serial console. Specifically, connect a Micro-USB cable to the J2 connector.

...

3. Connecting USB Devices to the VMware Virtual Machine

If the Linux is running in the VMware virtual machine, perform the following procedure in order to get access to nRF9161 DK and nRF5340 DK over USB:

...