...

The Emcraft STM32MP1 Starter Kit supports several boot devices. Selection of a specific boot device is defined by the state of the jumpers on the JP10 header of STM32MP1-BSB and switches on the SOM-BSB development board, as described in the following sections.

Selecting Boot Device on STM32MP1-BSB

Selection of a specific boot device is defined by the state of the switches on the STM32MP1-BSB development board, as follows:

State ON means presence of a jumper on the corresponding pin of the JP10 header; state OFF means absence of a jumper.

Selecting Boot Device on SOM-BSB

Selection of a specific boot device is defined by the state of the switches on the SOM-BSB development board, as follows:

...