| Table of Contents |
|---|
The Emcraft STM32MP1 Starter Kit supports several boot devices. Selection of a specific boot device is defined by the state of the switches on the SOM-BSB development board, as follows:
SW4.2 | SW4.3 | SW4.4 | |
Boot from SD Card | - | OFF | ON |
Boot from on-module eMMC | - | ON | OFF |
Boot from USB Serial Downloader | - | OFF | OFF |
Boot in Debug engineering mode | OFF | ON | ON |
Hardware Modifications for Boot in Debug Engineering Mode
...
Refer to the following additional information on how to boot from the various devices:
Booting from USB Serial Downloader.